Home › Blog › Streaming and Internet
DStv WiFi Connector vs LAN Cable: Which Is Better?
Your Explora needs the internet for full Catch Up and remote recording, and there are two classic ways to get it there: a LAN cable from the router, or a DStv WiFi Connector. In the steep, multi-level homes of Hout Bay, the right pick isn't always obvious. Here's how the two compare, and which one we'd choose in your house.
Quick answer
A LAN cable is the steadier choice, and DStv itself calls a direct cable the most stable option. A DStv WiFi Connector wins when the router is in another room and a cable would be messy or impossible to run. If WiFi near the TV is weak, a mesh point with a short cable beats both.
How a cable and DStv's WiFi Connector each get your Explora online
A LAN cable, also called a network or Ethernet cable, runs straight from a spare port on your router to the green Ethernet port on the back of the Explora. There's nothing in between and nothing to set up, apart from switching on Connected Services.
The connector does the same job without the long run. It joins your WiFi, takes power from the decoder's USB port and hands the connection to the Explora. In the WPS setup, it even plugs into that same green port with a short lead.
One thing to know about WiFi: it's shared. Every phone, tablet, smart speaker and laptop in the house uses the same airwaves, and DStv's guide points out that WiFi, Bluetooth and smart devices can interfere with a wireless link. A cable sidesteps all of that.
So the decoder is happy either way. It's a question our team doing DStv installation in Hout Bay answers often, and the real difference is the path the signal takes between your router and the TV cabinet.
LAN cable vs DStv WiFi Connector side by side
| Factor | LAN cable | WiFi connector |
|---|---|---|
| Stability | Best, because other wireless gadgets can't interfere | Good when the WiFi at the TV is strong |
| Setup | Plug in both ends | WPS button, setup wizard or a laptop |
| Once-off cost | A standard network cable, plus fitting if it goes through walls | The connector, sold at DStv Service Centres, Agencies and major retailers |
| Monthly cost | None | None |
| Distance | Handles long runs when installed properly | Limited by how far your WiFi reaches |
| Looks | Needs neat routing along skirting or through a wall | No new cable across the house |
| Best for | Router in the same room, or a cable already in the wall | Router in another room, rentals, homes you can't drill |
Neither option changes your DStv subscription. An Explora already carries the Access Fee, R125 a month at the time of writing, however it gets online. For the bigger picture on that fee, see our Access Fee explainer.
Why Hout Bay homes make the choice harder
Houses here climb the slopes. In Hughenden and on the hills above Victoria Road, the router often lands on the bottom level near the fibre box, while the main TV sits two floors up with the view. Every concrete slab between them cuts WiFi.
Then there's the mountain. Chapman's Peak and the Karbonkelberg shade the dish's view of the sky in some spots, and that's a satellite problem the internet can't touch. If your picture keeps dropping, read our notes on DStv signal problems in Hout Bay first.
Holiday homes and rentals in Llandudno and Penzance Estate add another wrinkle. Guests change routers, unplug things and forget passwords. A cable keeps working long after a WiFi setup has been knocked over.
Need DStv installers in Hout Bay?
Tell us what you need or what your screen is showing. We give you a clear price before we drive out.
When a LAN cable is the better choice
- The router is in the same room as the TV, or a short run away.
- There's already a network point or conduit in the wall.
- You stream a lot of HD Catch Up. DStv recommends at least 10Mbps for HD.
- Several people in the house game, video call and stream at once.
- It's a rental and you want a setup guests can't easily break.
Building or renovating? Put a network cable to every TV point before you plaster. It costs little at that stage and saves a lot later. Our DStv Explora installation visits often include planning those points.
When the DStv WiFi Connector makes more sense
- The router is several rooms away and there's no tidy cable route.
- You rent and can't drill through walls.
- The WiFi near the TV is already strong. Test it with your phone first.
- You want a quick fix today, with a cable planned for later.
Setup is quick once you know the steps. With WPS, you press the button on the router, then on the connector, and wait about two minutes for the WiFi light to turn solid white. Afterwards, run the Connectivity Checker under the Help button and look for two green ticks.
The connector draws its power from the Explora, so there's no extra plug to find. Place it beside the decoder rather than on top, as DStv's guide advises. Our earlier guide to connecting DStv cables shows every port on the back of the box.
The middle road: mesh WiFi and a short cable
In big hillside homes we often use a third option. A mesh WiFi point goes in the TV room, and a short LAN cable links it to the Explora. You get cable stability at the decoder without a long run through the house.
It also fixes dead spots for phones and laptops, which is why it's a big part of our WiFi and network installation work around Hout Bay.
Safety first
Running cable through a ceiling or roof space means ladders, loose boards and live electrical wiring. Please leave that part to a technician. Never open the decoder, and don't pull cables out of a wall box that also holds a plug socket.
What about the Explora Ultra?
The Explora Ultra has WiFi built in, so it doesn't need a connector at all. It also has an Ethernet port, and the same rule applies: a cable is steadier, WiFi is easier.
If you're weighing up an upgrade, our comparison of Explora and Explora Ultra prices helps you decide. Already have one? Our guide on setting up the Explora Ultra covers its WiFi step.
Get the right connection first time
Not sure which option suits your home in Scott Estate, Northshore or higher up the valley? We'll look at where the router and TV sit, test the WiFi at the decoder and quote before we start.
Talk to our Hout Bay team to book a visit. We're often there the same or next day, depending on the schedule.
DStv WiFi connector: FAQs
Is a LAN cable better than the DStv WiFi Connector?
For stability, yes. DStv calls a direct Ethernet cable the most stable option because your other WiFi, Bluetooth and smart devices can't interfere with it. The connector is the better choice when a cable simply can't reach the TV neatly.
What internet speed does the DStv WiFi Connector need?
DStv asks for at least 2Mbps for downloads and remote recording, 4Mbps for SD viewing, and recommends 10Mbps for HD. The same figures apply to a cable. Over WiFi, measure the speed next to the TV, not next to the router.
Can I use any network cable with my Explora?
Yes, a standard Ethernet cable from a computer or electrical shop works. Plug one end into the green Ethernet port on the Explora and the other into a free port on the router. For long runs through walls, a properly installed cable with good plugs lasts far better.
Can you run a network cable to my TV in Hout Bay?
Yes. We run neat network cables in Hout Bay homes, including multi-level houses on the slopes, and add a mesh point where a cable can't go. We quote before we start and test Catch Up on the TV before we leave.
Does the DStv WiFi Connector stop buffering?
Only if the WiFi it picks up is strong. The connector can't add speed that your router doesn't deliver at that spot. If Catch Up buffers, test your phone next to the TV, then think about a cable or a mesh point.
Talk to our Hout Bay team
Call or WhatsApp us for a quote. We answer quickly and we always price the job before we arrive.